Description of safety matters when using heavy duty shelves

　　1, the use of heavy shelves should be top-heavy: the principle of putting light goods at the top and heavy goods at the bottom should be achieved.

　　2, the use of heavy shelves to prevent overload: the weight of each layer of goods storage shall not exceed the larger load of the shelf design.

　　3, the use of heavy shelves to prevent ultra-high width: shelf height, layer width has been limited, the size of the board and goods should be slightly less than the net space of 100mm.

　　4, the use of heavy shelves should be anti-impact: the forklift should be handled as lightly as possible during operation.

　　5, the use of heavy shelves to shelves above the display of goods, operators try not to directly into the bottom of the shelf.

　　6, the use of heavy shelves to prevent the use of non-standard floor board (card board) on the shelf, Sichuan bottom is more suitable.

　　In the use of heavy shelves, when the height of the goods is more than eight meters, a special attention is that it needs to have the corresponding loading and unloading machinery.

Read recommendations:

4 tier metal bookself sales

adjustable storage shelves

Background of shelf development.stainless steel wire rack for sink