Frequent precautions for warehouse shelves acceptance 4-Tier Wire Storage Racks For Pantry / Steel Organizer Wire Rack / Utility Shelving Unit / Black Wir

　　Warehouse shelves are usually customized according to the actual needs of customers. There are no large stocks, and the shelves are composed of multiple components. They need to be assembled on the spot. For enterprises, procurement is a large project, which involves the design of the preliminary plan, the mid -term supervision project, and the post -acceptance work. Among them, pre -installation of product installation is also an important link. The following three main aspects are introduced to the inspection and acceptance details of the shelves.

　　1. Check whether the pillars and beams are bent and deformed

　　The columns and beams are two important components of the shelves, which are longer. The logistics vehicle needs to be transported to the scene. If the packaging is not rigorous, it is likely that bending deformation or surface damage will occur. You must pay attention to check when accepting.

　　2. Check whether there are defects on the surface weld

　　The surface welding seams on the shelves are compared to test the production capacity of the shelf manufacturer. It must be uniform, and there must be no defects such as cracks, residue, welding tumors, burning, arc pits, and needle -shaped pores. You must also observe it carefully during acceptance.

　　3. Check the quality of the surface spraying

　　The surface spraying of the product is not only aesthetic, but also plays a good protective effect. It is easy to see the surface treatment. Some can also gently tap the hammer to see if there is a falling off. Be careful not to be too hard. Acceptance of storage shelves is a key step before installation.

Read recommendations:

kitchen baker's rack wholesaler

5 shelf wire storage rack sales

Why should the storage shelves be checked regularly?3-tier metal utility rolling cart wholesale