How to buy mold shelf.wickes metal garage shelving

　　When selecting the procurement mold shelves, there are three main aspects:

　　Moom goods are heavy. This needs to be calculated based on the weight of each mold that can be placed at most of each plate. Therefore, selecting a mold shelf suitable for inheritance. Considering the impact load under the dynamic carrier, the load must be greater than the load. The total weight of the mold is generally the total weight of the mold load = 1.5 times. Generally, for heavy -duty mold racks, most of them use dual -structured mold racks to ensure safety.

　　Mold shelves size. The actual available height of the size (length, width) and each layer of the mold is placed. It needs to be determined according to the actual measurement size of the mold. The length and width of the layer plate should be slightly greater than the total length and width of the mold. The space height of the layer is better than the total height of the mold.

　　Turn. For the weight of the mold within 200kg, you can configure a hanging gourd at the top of the mold frame to assist in handling. For heavy molds of more than 200kg, you can use a mobile Longmen frame and install an electric hanging gourd to achieve handling, which can reduce a lot of manpower.

Read recommendations:

4-Tier Display shelving / Metal Wire Shelving Unit / Storage Rack Shelving Unit

wire kitchen/pantry shelving unit manufacture

Three points to pay attention to when customizing the attic platform shelf.4-tier metal utility roll