Internal structure analysis of shelves.wire closet shelf installation

　　Both ends of each beam of the shelf are equipped with a locking device - a safety latch or bolt, so that the beam can be fixed on the column without disorder, in case of upward external force and out.

　　The diameter of the bolt and the smaller size of the embedded bolt must be determined by calculation according to the actual load, earthquake load or wind load. The concrete of the fixed shelf column foundation must be cured continuously for 28 days, and withstand the corresponding pressure, and the uneven settlement of the foundation must meet the requirements of use. The column foot of the storage shelf column should be accurately fixed on the concrete foundation. To ensure that the beam is engaged with its locking device (or screw and nut), the normal operation of the beam lock or the fastening of the screw and nut should be checked regularly during use, and the damaged device should be replaced in time.

　　The selection of high-quality steel, surface rust prevention and decorative treatment, in order to ensure the shelf function, as far as possible to reduce the project cost. The shelf company has a strict design procedure, regardless of the durability limit state is still a larger load limit state design shelf structure.

Read recommendations:

Heavy Duty Steel Security Cart / Custom Steel Wire Racks / Steel Wire Racking

3 tier wire shelving unit Factory

metal garage shelving ideas Vendor.Warehouse shelves are the foundation of warehouse storage systems