Rules for Safe Use of Shelves in Shelf Factories.Industrial wire shelving unit

　　1. Anti overweight: The net weight of each layer of goods stored should not exceed the larger bearing capacity of the storage rack design plan.

　　2. Extremely high and super high prevention: The height and width of the storage shelf building have been restricted, and the specifications of wooden card boards and goods should be slightly lower than the net indoor space by 100mm.

　　3. Collision prevention: Electric forklifts should be handled with utmost care during the entire operation process.

　　4. Prevention of heavy lifting and light lifting: The standard for slow unloading of goods in high-rise residential buildings and placing heavy goods on the ground floor should be ensured.

　　5. Avoid using non-standard floor surfaces (wooden card boards) on storage shelves, with a suitable Chuanzi bottom.

　　6. When there are goods placed on the storage shelves, actual operators should try not to directly enter the bottom of the storage shelves as much as possible.

　　When designing storage shelves, shelf manufacturers should be reasonable. When designing the structure of storage shelves for integrated three-dimensional warehouses, they should pay special attention to the composition of the following two unfavorable loads: the support of the entire warehouse under full load when the wind load is effective; The support under the full load of the entire reservoir during the effectiveness of leveling earthquake disasters. In addition, sufficient consideration should be given to the distribution of goods in the warehouse, that is, when one side of the warehouse is fully loaded and the other side is fully loaded, the basic stress analysis of the warehouse should be carried out. Although there is a basic theory of goods allocation and storage in warehouses; Although it is required in the user manual of the warehouse that the distribution and storage of goods in the warehouse should be as symmetrical as possible, it is necessary to take into account the major responsibilities when calculating the design plan.

Read recommendations:

4 tier metal bookself sales

5 tier metal bookself

Performance characteristics of shelves