Shelves assembly tutorial.steel organizer wire rack chrome

　　1. First buy the shelves you needed on the Internet according to your needs, and wait for the delivery to deliver the goods to the door.

　　2. After receiving the items from the courier, you need to open the outer packaging inspection and see if the parts are complete. If it is not complete, you can refuse to accept it.

　　3. In the case of determining that the parts are complete, you can start the assembly shelves by yourself. First of all, you need to take a closer look at the installation manual and sort out the installation order.

　　4. Then you can start installing the pillars and install the pads on the column first.

　　5. Then install the top and underlying triangles, install the triangular sheet on the column with a screw, but do not twist the screws too tightly and bring it on it so that all are installed and adjust.

　　6. Then install the load -bearing board at the top and bottom. You can also use the screw ribbon, don't twist too tightly.

　　7. Next, put the middle load -bearing board in the middle, put it in a suitable position according to the needs, and then bring the triangle, load -bearing board and pillars with screws, or do not twist the screws too tightly.

　　8. Finally, the shelves are set up. After the wall is vertical, the screws are gradually tightened upward from the bottom. After the screws are tightened, they shake the shelves with both hands to see the rack steady. Good shelves.

Read recommendations:

Wire Shelving Unit / Adjustable Heavy Duty Metal Shelf / Steel Organizer Wire Rack Chrome / Expandab

stainless steel wire shelf rack

What are the problems with using ordinary storage shelves?storage shelving unit for bathroom