Customize the mold rack suitable for storing your own mold

　　Mold shelf is a kind of shelf, abbreviated as: mold shelf, also known as drawer shelf, which mainly stores various mold items. According to the requirements of bearing capacity, it is divided into light mold shelf and heavy mold shelf. The top of the shelf can be equipped with a mobile hoist truck to facilitate the lifting of the mold.

　　Four surface treatment schemes are commonly used for mold shelf: painting, plastic spraying, hot galvanizing and cold galvanizing. Hot galvanizing is the most effective way to prevent rust. Of course, the cost is also high, and it is not accepted by the majority of consumers; The most widely used are painting and plastic spraying.

　　The light die shelf uses 100 # channel steel as the special column. The column is made of high-quality Q235 strip steel through one-time rolling. Drawer tray frame is generally welded with rectangular tube and 4.0 bending piece to form a steel plate. The guide groove is formed by bending 4.0 steel plate. The top and bottom are connected by beams, and the top is paved with a roof, which can store items.

　　The heavy mold shelf uses the heavy shelf as the overall frame, and the guide rail and drawer plate are installed on the shelf column. Generally, the column shall be no less than 90 × 70 columns. The mold shelf is composed of columns and pull rods. The guide slot is installed on the column, and the upper and lower parts are connected and fixed with beams. Then the drawer tray is installed in the guide slot, the limit pin and guide rail are installed, and finally the top plate is laid. The overhead rail and crown block can also be erected on the rack column, and the manual or electric hoist can be installed. The overhead rail is not less than 100 × 50 Weld the beam. After the black embryo of the whole part is completed, the final surface treatment process of shot blasting, oil removal, rust removal and plastic spraying can be completed before packaging and delivery.

　　Advantages of mold frame:

　　1. Safe and reliable mold frame: additional positioning device, safe and reliable use.

　　2. Easy operation: bearing combination, smooth sliding, and independent lifting device.

　　3. Simple structure: It is assembled by a variety of combined parts, which is convenient for transportation, installation and disassembly.

　　4. Space saving: The floor area is only 1.8 square meters, which can store dozens of medium-sized molds, effectively saving space and facilitating the maintenance and management of molds.

　　5. The mold frame with different specifications and bearing capacity can be accepted according to user requirements.

　　6. The color can be customized.

　　7. The bearing surface is made of patterned plates, which can increase friction and prevent the mold from slipping.

　　8. Modular parts can be assembled in any length.

　　9. The height of the foundation can be adjusted to overcome the unevenness of the site surface.

Read recommendations:

3-Tier Indoor Outdoor Plant Display Shelf / Metal Plant Shelf / Metal Plant Stand / Plant Rack / Flo

wire storage rack kitchen Manufacturing

Characteristics of mold shelves.storage shelving unit cover