Installation precautions for ordinary shelves

　　1: Structural positioning: The positioning of ordinary shelves is basic and requires step-by-step steps. In structural positioning, blank spaces should be reserved according to the actual situation. Similar to connecting ordinary shelves, columns should be installed first, and then crossbeams should be grafted. Alternatively, one column and crossbeam should be alternately installed

　　2: Stairs: In order to facilitate the installation of ordinary shelves, installing stairs first can reduce the cost of installation time. It is recommended that movable stairs can be installed first. Welding fixed stairs requires the installation of ordinary shelves to be completed before installation. To avoid deviation in channel distance, stairs cannot be installed normally

　　3: Layered ordinary shelves: Ordinary shelves are not stored separately. Usually, the upper layer of ordinary shelves is equipped with laminated ordinary shelves for use. The installation of laminated ordinary shelves requires waiting for the laying and welding of the boards to be completed before installation

　　4: Planking installation: Planking installation is relatively easy, and multiple welding points are required after installation to ensure that the layers do not produce friction or movement sounds after being squeezed. During installation, installation personnel need to continuously adjust

　　5: Chemical bolt stability: After the installation of the column crossbeam, it is necessary to immediately use chemical bolts for drilling. After the chemical bolts are drilled, it is necessary to wait for about 10 minutes before proceeding with the installation of ordinary shelf parts

　　6: Installation of bottom parts: The installation of bottom parts is usually carried out after the overall structure is completed, and can also be adjusted by oneself

　　7: Lighting: lighting is an essential equipment for ordinary shelves. In the installation, the position of the lighting should be adjusted so that no dead space for middle lighting can be left. The installation of lighting should be completed after the installation of ordinary shelves

Read recommendations:

4-Tier Wire Shelving Unit / NSF Chrome Wire Shelf / Wire Storage Rack / / For Living 4-Tier Chrome

5 shelf wire storage rack

The difference between warehouse shelves and supermarket shelves.wire storage rack with drawers