Installation steps/methods for ordinary shelves.stainless steel wire shelf wall mounted

　　1. Open the packaging of ordinary shelves and first check whether the products inside the packaging are qualified and complete,

　　2. Start installing the main frame by placing the distance between the two columns and the crossbeam, and then clip the end of the crossbeam onto the butterfly opening of the column, and the same applies to the crossbeam at the other end. So now we have installed the crossbeam on one side. The other side is also the same, so after installing all the crossbeams (usually in layers). You can start installing the laminates.

　　3. Start installing each layer of boards.

　　4. Install the subframe, align the crossbeams and columns of the secondary ordinary shelf, and then dock them with the columns of the main ordinary shelf, adjusting the distance.

　　5. After the installation of ordinary shelves, refer to the acceptance standards of ordinary storage shelves, and use a rubber hammer to hit the corresponding parts of the column and beam to adjust them to the most appropriate position.

　　6. Firmly tap each part of the regular shelf to check if it is securely installed. It also tests the durability of ordinary shelves.

Read recommendations:

2-Tier Metal TV Stand / Entertainment Center / TV Console Table For Living Room / Bedroom

5 shelf wire storage rack Factory

What do you pay attention to when choosing shelves?