Judging the quality of metal shelves.plastic storage shelving unit

　　1. Structure of metal shelves: The crossbeam of metal shelves depends on the hook structure of the crossbeam and the form of the crossbeam hanging to the column: it is better to have more hooks on the crossbeam, and the more force it bears, the better; The hook of the crossbeam should be hung on the column to see if the contact between the hook and the column is tight and consistent. The inner side of the hook should be close to the side of the column without any gap, so that the structure can be stable and durable under good force.

　　2. Treatment of metal shelves: The spraying treatment of metal shelves should be uniform and have strong adhesion. Whether the surface of the metal shelves is evenly sprayed depends on whether there are any omissions on the inner edge of the metal shelf column holes. When inspecting, a hard object can be gently tapped to indicate that the metal shelves are prone to rust if they easily fall off.

　　3. Material of metal shelves: The material of metal shelves also depends on its welding process.

　　Other auxiliary equipment

　　According to the warehouse process flow and some special requirements of users, some auxiliary equipment can be added appropriately, including handheld terminals, forklifts, balance cranes, etc. Enterprises with conditions can also choose palletizing robots, AGVs, etc.

Read recommendations:

3-Tier Wire Storage Racks For Pantry / Steel Organizer Wire Rack / Utility Shelving Unit

3 tier metal bookself

The assembly of lightweight shelves can be carried out through the following steps