Knowledge of the installation steps for warehouse shelves.wire storage rack with drawers company

　　Warehouse shelves are widely used in warehouses, especially in factories that produce heavy products. It is a three-dimensional structure with characteristics that ordinary shelves do not have, such as space saving and high load-bearing. It also plays a very important role in the shelf industry, with more and more consumers choosing to purchase. But how to install it after purchase?

　　First, prepare tools for installing storage shelves in advance, such as spanners, hammers, Needle-nose pliers, etc. Then prepare for installation in advance, first unpack the packaging of the shelves, and check if there are any missing components on the shelves through the installation plan provided by the manufacturer. If there is, it is necessary to immediately provide feedback to the manufacturer. If not, proceed to the next stage.

　　Secondly, first install a portion of the main shelves and follow the installation flowchart to clarify the various parts of the storage shelves. One of the horizontal support frames only needs to be aligned with the interface of the main frame support frame facing both ends, and the other side of the main frame and subframe facing both ends. Then insert the screw into the round hole at the connection of the shelf, adjust it to the appropriate spacing, and tighten the screw with a wrench.

　　Third, when installing the sub frame, the sub frame and its support frame should be erected, and then the main frame should be connected, and the spacing between them should be adjusted. Install the screws and tighten them with a wrench. After the installation of the shelf, adjust the matching position of the vertical and horizontal support frames to the appropriate position according to the specifications of the shelf. Then, the layer board can be placed on a horizontal support frame and fixed with the components of the supporting equipment. A part of the storage shelf can be forcefully knocked to check whether the shelf is firmly installed.

　　Finally, testing should be conducted before the installation of storage shelves. If qualified, it can be installed. During the installation process, each shelf component should be inspected and then assembled to ensure its quality and safety. And it needs to be installed in accordance with national requirements and specifications, with quality and strength meeting the relevant requirements of the shelves.

Read recommendations:

3 Tier Wire Closet Shelf Organizer With Hanging Rod / Freestanding Open Wardrobe Organizer

stainless steel wire shelf rack Vendor

Classification of shelf system.Cabinet Shelf Organizer Storage Rack wholesaler