Shelf Safety.over door wire storage rack

　　1. Observe whether the materials used are good or defective, whether the panel is thick enough, etc. The most crucial point in processing and manufacturing is whether the spot welding is firm and whether there are any missing solder joints;

　　2. During the installation process of the mold frame, it is necessary to ensure that all fastening screws are securely locked; Are all the safety screws on the drawer board installed in place; Whether the foundation screws are properly tightened, etc; Another design issue is the insertion method of the mold holder for the drawer board. If it is inserted from the back, even if you forget to install the safety screw, the drawer board will not fall from the front. If the design is inserted from the front, it is very dangerous to forget the safety screw.

　　3. During the operation process, use the shelves according to the user manual and do not assume safety. In practical operation, some users use a hoist to diagonally pull the mold for convenience, which changes the force on the mold frame and easily causes the mold shelf to overturn due to uneven force. After cleaning or moving the mold, the drawer should be promptly returned to its original position.

　　4. When purchasing a mold holder, do not look at the price first, but look at the quality first. Quality is the most important thing. A decrease in price also means a decrease in quality, but is this absolute? You can find some reputable mold frame manufacturers to customize it, which is safe and reassuring. Please attach the mold frame safety operation manual to ensure safety during use.

Read recommendations:

MZG Steel Storage Shelving 4-Tier Wide, Black

4 tier steel wire shelf equipment

What are the help and convenience of the use of three -dimensional warehouse shelves?wire storage ra