The issue of warehousing shelves acceptance needs to be followed.how to install a wire closet shelf

　　In the warehouse warehousing, the storage of the goods usually uses shelves. For the new warehouse, the primary work is to choose a storage system that is suitable for you and build it. There are many storage shelves manufacturers on the market. Even if we have no problems in the early inspection, we must pay attention to check whether the quality of the shelves is qualified and whether we meet our own storage requirements. So how to accept it for no experienced friends? Let ’s take a look with the editor!

　　01. Material and thickness

　　The material of the storage shelves is generally used for cold -rolled steel profiles, and the thickness of the board is also designed according to the load of goods. It can be said that the carrier's load indicator selection and thickness account for a very important part. Therefore, only if the quality of the steel is qualified and the thickness of the plate can be used with no problem, you can use it with confidence. You can mainly detect these two data during acceptance.

　　02. Structure design

　　Check the structure of the shelves. For example, if the columns depends on the bend of the section, there are many bending and uniform. Generally, the uniform and symmetrical structure is better; there are also beams to see the hook structure and connection form of the beam. The more stable the force is, the contact between the hooks and the column must be closely consistent. Only the structure that has no gaps can be better, and it will also be more durable.

　　03. Surface treatment

　　The surface of the storage shelves is generally sprayed. The surface of the spraying plastic should be uniform and strong, and check whether there is any omissions on the edge of the inside of the column hole and not handled it. You can also tap gently to check whether the surface is easy to fall off, and it is easy to rust. In addition, if the shelves are not protected during transportation, they may be damaged, and these should also be paid attention to check.

　　04. Size issues

　　Under normal circumstances, the size of the storage shelves and design of the production are basically the same, and the deviations will not be too large, so you can measure the size when accepting the acceptance to see if each component and the overall size deviation are large. If there is any explanation, it may be cut off, or there is a problem with the production processing, it is an unqualified shelf.

Read recommendations:

MZG Steel Storage Shelving 5-Tier, Chrome

5 ft wire closet shelf

Current status of shelf development