counter top rack manufacturer.Cantilever Shelf Selection Guide

　　The shelf is mainly composed of components such as columns, cantilever beams, bases, and vertical pull rods, and is directly supported by overhanging components to carry goods.

　　1. The shelf should be composed of components such as columns (or column pieces), bases, cantilever beams, vertical pull rods, etc;

　　2. The shelf structure should be made of cold-formed thin-walled steel/section steel, and the connection of each structural component should be easy to disassemble;

　　3. The interlayer spacing of the shelf cantilever beam should be adjustable according to the height of the unit cargo;

　　4. The front end of the cantilever beam should be raised by 2-4 °. When fully loaded, the front end of the cantilever beam should be higher than the root of the beam;

　　5. The cantilever beam should have safety protection devices to prevent goods from falling and sliding down;

　　6. Vertical pull rods should be installed between adjacent columns of the shelves.

　　Product features

　　1. It can be divided into single arm and double arm for efficient storage of tubular, elongated, and plate-shaped objects;

　　2. Fully utilize the load-bearing capacity of materials, which have the characteristics of high load-bearing capacity and low cost;

　　3. Prefabricate double row holes for columns, with a pitch of 100/140mm. The cantilever is connected to the columns through plate pins and can be adjusted up and down.

Read recommendations:

String storage box

kitchen baker's rack Manufacturing

The thicker the thickness of the heavy shelf board, the better?wire storage rack kitchen company