garage storage shelving unit distributors.Teach you a few tips for proper maintenance of different workbenches

　　In order to maintain the technical performance of the workbench at all times, the initial setup, daily operation, and maintenance of the equipment are crucial. If these issues are disregarded, the performance of the equipment may decrease. If not maintained for a long time, it may also cause damage to the equipment, causing the workbench to operate in an incomplete state. Therefore, it is necessary to learn the correct maintenance methods. So, how can we maintain different types of workbenches with different structural designs, such as lean management workbenches and ultra clean workbenches, in a reasonable way? Today, the editor will teach you some methods.

　　1. Sealing: This workbench adopts a structure where the positive pressure pollution area is completely surrounded by the negative pressure area.

　　2. Moreover, before using formaldehyde fumigation to sterilize the workbench, to prevent formaldehyde leakage, it is necessary to first use&quo; Soap bubbles; Perform a sealing inspection on the entire machine.

　　3. Regularly (usually every two months) measure the wind speed in the work area with an anemometer. If it does not meet the technical parameter requirements, the power supply voltage of the fan can be adjusted.

　　When the fan voltage is adjusted to a higher level and the wind speed in the working area still does not meet the technical parameter requirements, the high-efficiency air supply filter must be replaced. When replacing the high-efficiency air supply filter, the high-efficiency exhaust filter must also be replaced at the same time. After replacement, use a dust particle counter to check if the sealing around the four sides is good. If there is any leakage, seal it with sealant.

　　5. The fan does not require special maintenance, but it is recommended to conduct a regular inspection.

Read recommendations:

kitchen baker's rack company

2 tier steel wire shelf distributors

How to remove rust on the shelves?