Precautions for acceptance of customized storage shelves.3-tier metal utility rolling cart

　　The warehouse shelves are usually customized and produced according to the actual needs of customers. There is no large quantity of goods in stock, and the warehouse shelves are composed of multiple components, which need to be assembled on site. For enterprises, the procurement of storage shelves is a big project, involving the preliminary scheme design, the mid-term supervision project and the post-acceptance work. Among them, the pre-installation acceptance of storage shelves is also an important link. The following three main aspects will introduce the acceptance details of storage shelves.

　　1. Check whether the column and beam are bent or deformed

　　The column and beam are two important components of the storage rack, and they are long, and need to be transported to the site by logistics truck. If the packaging is not rigorous, it is likely to have bending deformation or surface damage, so attention must be paid during acceptance.

　　2. Check the surface welds for defects

　　The welds on the surface of the storage shelf are a test of the production capacity of the shelf manufacturer. They must be uniform and free of defects such as cracks, slag inclusion, weld beading, burn-through, crater and needle-shaped pores. They must be carefully observed during acceptance.

　　3. Check the surface coating quality

　　The surface of the storage shelf is sprayed with plastic not only for beauty, but also for good protection. It is easy to see if the surface treatment is not good. Some can also be gently knocked with a hammer to see if there is any peeling phenomenon. Be careful not to use too much force. Acceptance of warehouse shelves is a key step before installation.

Read recommendations:

11-Tier Metal TV Stand for 42 inch TV / Entertainment Center / TV Console Table With Open Storage Sh

book storage rack wholesale

How to choose a supermarket shelter?adjustable metal garage shelving company