Principles of Metal Shelf Design.wire shelving units home depot

　　1. Firstly, consider the volume of the warehouse, the volume, weight, and size of the goods, the convenience of forklift loading and unloading, whether the impact of the forklift will damage the metal shelves, and the protection of earthquake intensity;

　　2. Secondly, it is necessary to consider whether there is sufficient space between the goods on Dongguan metal shelves, whether there is a fire escape, and whether the operation of workers is convenient and labor-saving.

　　3. Finally, consider what steel to use, how to apply rust prevention treatment to the surface, and so on. While ensuring that the metal shelves meet the demand, the manufacturing cost and cost of the metal shelves are reduced.

　　In addition, the following issues should be considered:

　　1. The usage requirements of metal shelves, the nature of the load, whether they can meet all the requirements for storing goods, whether assembly is convenient and fast, whether loading and unloading of goods is simple, and whether the size and clearance of metal shelves can meet the needs of the warehouse.

　　2. Test whether the pressure resistance, fire resistance, and impact resistance of metal shelves meet the existing conditions of the warehouse. Based on the type of stored goods, consider the locking devices of metal shelves, such as bolt locking or screw fastening. If damaged, whether it is convenient to replace them quickly. In addition, the four corners of the frame columns should be fixed on the concrete foundation. The shelves and floors should be fixed to the ground using embedded parts or chemical bolts. This is designed for heavy-duty metal shelves, as they are heavily loaded and fixed to the ground to help maintain stability and prevent them from tilting. In addition, it helps to prevent earthquakes, while also responding to the impact of loading and unloading machinery on metal shelves.

　　3. Set up eye-catching signs on metal shelves based on the type of goods, making it easier for staff to check for leaks and fill gaps. The area of each label should not be less than 20 square centimeters, and the clarity and color of the font should be set according to the maximum unit load. Maximum load mark (kg) for each layer, maximum allowable load, number of unit loads allowed to be stored in each cargo hold, etc

Read recommendations:

kitchen baker's rack wholesaler

microwave stand countertop wholesaler

How to guarantee the security of automated three -dimensional warehouses?wire storage racks with whe