Related issues that should be paid attention to heavy shelves.Cabinet Shelf Organizer Storage Rack price

　　1. What specifications of the pillars of heavy shelves are produced;

　　2. What materials are used in the pillars;

　　Third, which material is used for processing;

　　Fourth, how long can the beams take a long time? Each layer of beams should be able to withstand multiple weights. How long should it be used to know the length of the beam? If you want to be longer and taller, you must customize a longer beam length to achieve this effect. The longer the beam, the more important the load is played, so the beams generally use two shorter columns as the main force part of the column. The width of the column section is equal to its length. The depth and gap between the beams of the beam should meet the following requirements: 1) When more than 75 % of the bearing capacity of the ultra -deep rectangular beam, it is recommended to choose a high -quality steel structure beam. 2) When more than 10mm, you can use the expansion screw to pull it out to reduce the span of the beam to the limit. 3) For overweight goods, use the expansion screws to pull it down to prevent damage. 4) How to plan the cross section of the beam, if you do not have special needs, you can contact the shelf manufacturer for measurement. 5) For the design specifications of the beam, in addition to the standard size, it is necessary to customize according to the actual situation of the customer. Generally speaking, the load per layer of the medium -sized shelves is usually less than 80kg, and the weight of the heavy shelves is generally 250kg. Therefore, the selection of the column specifications is tailor -made according to the specific requirements of the customer. 6) Regarding whether the packets and column materials are used to choose the pavilion shelves feasible.

Read recommendations:

3-Tier Metal Display Shelving / Wire Shelving Unit

heavy duty metal garage shelving wholesaler

Introduction to Lightweight Shelves.black wire shelving unit