Crushing shelves.bathroom storage shelving unit

　　Pressing the shelves: guide rail, beam, column, carrier carrier composition, the track is fixed on the beam at a certain angle, the carrier is running strictly, pushing the tray cargo in front, and the tray is placed on the slide. Later The original push will be pushed to the rear, which can currently be pushed to 5 tray. On the sliding rail, the slide rail itself has a certain tilt, and the slide will automatically slide forward. The overall structure adopts the principle of "folder". The tray is placed in the carrier car and was pushed into the shelves in turn. The access method is the same as the driving shelves, but the forklift does not need to enter the shelves. Because the depth of the shelves can be designed as multiple in multiple directions The tray position, the space for pressing the shelves is higher than that of ordinary shelves. Safety and operating effects are higher than the sailing shelves, and are widely used in cold storage, libraries, electronics and other industries.

　　1) High storage density and poor accessability, generally depth can be 3 storage bits.

　　2) The use of space with beam -type shelves can save 1/3 of the use of space, increasing storage density, but it cannot achieve the management of the goods first.

　　3) Use general forklift access.

　　4) Applicable to small amounts of items.

　　5) Not suitable for overweight items.

　　6) The items will automatically slide to the forefront.

Read recommendations:

cabinet shelf Factory

storage shelving units screwfix

What should be noted for the attic shelf elevator.wire shelving unit 12 inch deep