Damaged warehouse shelves

　　The damage to warehouse shelves is usually very obvious. It is difficult to miss when one or more structural components are bent, twisted, or completely broken. However, sometimes it may be difficult to detect some damage, and seemingly small or insignificant problems are actually serious problems. Such damages can lead to accidents. Sometimes, workers do not notice or report damage. This is the result of regular and thorough inspections. Here are the key points to pay attention to when identifying damaged shelves. Come and customize the shelves to learn more.

　　Overall appearance: Does the shelf look vertical and horizontal, or is it twisted and skewed? A bent row or poor alignment clearly indicates a problem with the shelf. This may be a problem with floor support, usually caused by vertical, horizontal, or diagonal support issues.

　　Evidence of impact: Forklifts or other material handling equipment often experience significant impacts. Paint scratches and dents on the frame protrude. The degree of damage is a key indicator of the degree of shelf damage. But this will not have a significant impact on other components and will not cause issues such as loose beams, brackets, or connectors.

　　Twisted or skewed vertical columns: It may be difficult to detect without careful inspection. Only slight bending can significantly reduce the ability of the column to stand under heavy loads. Use a three foot high ruler and place it on a vertical surface. If there is a gap, it is a clear weakness.

　　Horizontal beam deflection: It is also necessary to detect the deflection of the beam. If sagging or bending is obvious, it is a serious problem. You should immediately reduce the load and take measures to repair or replace structural components.

　　Diagonal brace misalignment: These should be easy to observe. Shelves that are subjected to force or physical distortion typically absorb impact force through diagonal swings. Ejecting or breaking diagonals is dangerous and requires immediate attention.

　　Rust spots: A light oil, bubbling, or rusty stain is definitely a sign of trouble. Once the metal corrodes to a visible extent, it is usually too weak to continue using. The evidence of surface rust is usually evidence of weak material strength. Repairs may be of no use and shelves should be replaced.

　　Loose bottom plate: The base of the shelf is crucial for its load-bearing capacity and stability. All shelves should be fixed to the floor with bolts. Any bottom plate with loose, bent, or missing bottom plates and bolts should be discontinued until it can be repaired or replaced

Read recommendations:

Wire Shelving for Industrial Wire Rack with Basket Heavy Duty Wire Shelving Unit

wire kitchen/pantry shelving sales

Automation and analysis of the composition and superiority of the automated three -dimensional wareh