When selecting the procurement mold shelves, there are three main
aspects:
Moom goods are heavy. This needs to be calculated based on the weight of
each mold that can be placed at most of each plate. Therefore, selecting a mold
shelf suitable for inheritance. Considering the impact load under the dynamic
carrier, the load must be greater than the load. The total weight of the mold is
generally the total weight of the mold load = 1.5 times. Generally, for heavy
-duty mold racks, most of them use dual -structured mold racks to ensure
safety.
Mold shelves size. The actual available height of the size (length, width)
and each layer of the mold is placed. It needs to be determined according to the
actual measurement size of the mold. The length and width of the layer plate
should be slightly greater than the total length and width of the mold. The
space height of the layer is better than the total height of the mold.
Turn. For the weight of the mold within 200kg, you can configure a hanging
gourd at the top of the mold frame to assist in handling. For heavy molds of
more than 200kg, you can use a mobile Longmen frame and install an electric
hanging gourd to achieve handling, which can reduce a lot of manpower.
Read recommendations:
2-Tier Shoes Rack Shoe Shelf Storage Organizer With Mesh Shelves
boltless steel shelving unit supplier
What are the differences in the entry and exit mode of automated three -dimensional warehouses?cabin
