Some problems with common ways to deal with three -dimensional warehouse shelves.wire shelving unit with wheels wholesaler

　　1. The foundation is soft. The unable to accommodate the self -weight of the house without the solid cement floor found, causing the host to sink and cause unevenness. You need to ramrate the base and flatte the pad.

　　2. Fixed production of glass bracket feet. There is no easy loss when grinding glass, resulting in differences in the level. Key factor that needs to be used.

　　3. For a long time, the machine only needs to replace a small part of the transportation chain glue. The old and new glasses are matched. The height of the use of the old glasses is different, resulting in the large and small heads of the grinding glass. You must lose all the box glue or simply incomplete delivery chain.

　　4. Warehousing shelves manufacturers. The conveyor chain in the glass and the front and rear pressure plates are not in a straight line (not level) in one conveyor chain of the glass. Screw implementation rod, so that 2500 glass grinding edges from beginning to end can be pasted on the side) can be transmitted on the long board conveying chain (after the glass enters 440cm, observe two places: the glass and machine on the conveying chain transmitted by the pressure plate transmission are the most. Whether the glass on the right on the right is still posted on the conveyor chain), and the shortage of the transport chain of the glass glass on the conveyor chain of the conveying chain of the conveyor board, you need to reduce the hiking climbing of the A -line frame on the right; The appropriate glass nail on the transport chain lifts off (free), and the guide rails that are risen to a character stand are flat. The adjustment level of the machine's conveying chain can also be reached.

Read recommendations:

4 tier wire shelving unit company

4 tier wire shelving unit Factory

Heavy shelter loft platform composition structure.adjustable metal garage shelving