Supermarket shelf production requirements.stainless steel wire rack manufacturer

　　The quality of supermarket shelves has a significant impact on the supermarket safety system. In today's rapidly developed world, everyone is concerned about modern logistics. The level of attention is also increasing, and the demand for shelves is also significantly increasing. The industry scope of shelf use is also constantly expanding, and shelf supply enterprises are also constantly increasing, forming a fiercely competitive shelf market. However, due to the low admission standards for the shelf industry and the lack of standardized industry standards, the following aspects must be achieved to avoid affecting the safety of shelf use. The warehouse shelves must comply with the following rules to ensure the quality and safety of the shelves.

　　After the assembly of supermarket shelves into column pieces, the accuracy should meet the following requirements: the height error of warehouse shelves is ± 2mm, the width error is ± 2mm, and the unevenness error of the bottom plate is ± 0.5mm. After welding, the accuracy of the crossbeam of the warehouse shelf should meet the following requirements: for the three column claw connection of the column clamp and the verticality of the base line of the shelf crossbeam, it should be within 2mm of the crossbeam length range, and the welding direction of the column clamp and crossbeam should maintain an error of ± 1mm.

　　Request for the overall installation of supermarket shelves: The straightness of the length of the pillar section of the supermarket shelves in the direction of width should be within 6mm. The error in the height of the warehouse shelves and the same floor crossbeam should be ± 1mm. The error in the distance between the bottom base of the pillar of the shelf section near the first floor should be ± 2mm. The displacement range of the shelf section in the same aisle and in a column should not exceed 5L

Read recommendations:

Storage box

wire corner shelving unit manufacture

How to prevent the deformation of light warehouse shelves during use?