The importance of shelf safety issues

　　Shelf safety is not only an operational issue, but also quality and management. Because the current standard of China's shelf industry is not complete, the lack of clear and necessary provisions for shelf design, manufacturing, installation, acceptance and other aspects, shelf enterprise behavior is not effectively standardized. In order to seize the market, some enterprises take low-price competition strategy, regardless of product quality, resulting in shelf system security risks, to people's production and life a threat. And our shelf management staff will make some mistakes in the operation!

　　First of all, the material is the most important of all the shelf parameters. Because the material of the shelf determines the performance of the shelf, such as load-bearing capacity, service life and so on. The main material in the shelf is steel, cold rolled steel, Angle steel, plate steel.

　　Secondly, we should pay attention to the shelf specifications, because this is a link that is easier for shelf manufacturers to cut corners. The shelf factory will basically not reduce the height of the shelf, reduce the length of the shelf, but will be in the thickness of the shelf layer, the diameter of the column and other places that are not easy to be detected. Therefore, when selecting and accepting shelves, it is necessary to measure the specifications of a lower plate, column, beam, etc.

　　Again, the operation of the shelf must pay attention to these points: absolutely not overweight; The size of the card and the goods should be slightly less than the net space of 100mm2; Do not overload, shelf height, layer width has been limited; Try to be careful not to touch the shelf; Put the light ones on top; Operators try not to directly enter the bottom of the shelf; If the beam and column of the shelf are found to be seriously damaged, the use should be stopped immediately; It is strictly prohibited to impact, and the forklift should check the shelves regularly and timely during operation. When there are goods placed above the shelf, do not use non-standard floor boards (card boards) on the shelf.

Read recommendations:

MZG Steel Storage Shelving 5-Tier, Chrome

4 tier metal bookself

Do you know this information about three-dimensional warehouses?metal bathroom shelves freestanding