The structure of crossbeam shelves

　　What are the conditions for placing the ground on a heavy shelf? Under what conditions should heavy-duty shelves be placed? For storage equipment and shelves, the important role in the warehouse now is to place shelves. Heavier goods are stored under high pressure, not only on bearings, but also on airplanes. Therefore, the actual design of shelves should be on the warehouse floor, because one of the factors to consider is to ensure that the warehouse floor on the shelves meets the standards. Below, we will carefully introduce heavy-duty shelves

　　The requirements for warehouse construction are: the warehouse construction should meet basic requirements such as ventilation, lighting, fire protection, logistics, etc

　　Requirements for shelves on the ground surface of the warehouse: Before installing heavy-duty shelves in Wuhan, the allowable deviation of surface roughness should comply with the following table (see zbj83015-89 standard), width (meters) dimension deviation (mm), and be less than or equal to 50 10, less than or equal to 150+15, and greater than 150+20 In the shelf area, the settlement deformation of the shelf floor should be less than 2L/1000

　　Only a groundwater level that meets the requirements can ensure that the verticality and levelness of the Wuhan scaffold after installation meet the installation requirements When the height of the building does not meet the standard, the frame will tilt, and the bottom torque will generate lateral torque, which will pose a hidden danger to the safe use of the frame The most serious consequence will be the collapse of the frame

Read recommendations:

2-Tier Wire Metal Shelving For Living Room / Metal Display Shelving / Metal End Tables

wire kitchen/pantry shelving maker

Operating procedures and precautions for crossbeam shelves