Cabinet Shelf Organizer Storage Rack Solution

　　Precautions for aluminum shelf layout

　　1、 Flat ground. Due to the three-way forklift used for aluminum shelves being lifted to a high altitude together with the operating room, if the wheels are uneven at both ends, it will pose a risk to the operation. If the ground height of the two wheels is 5mm, the fork rises towards the sky and tilts to one side until it reaches 50rm. If two items are not neatly stacked, if they come across goods. In addition, the stacker crane can move within 20 kilometers, which increases its risk.

　　2、 Ground subsidence: Because the foundation is soft, it can cause natural subsidence for one or several years and also result in uneven ground. In addition, there is a support block at the bottom of the narrow road forklift. To ensure that the forklift does not tip over, there is a gap of about 15mm between this support block and the ground. If the ground is not flat, it will rub against the ground.

　　In fact, aluminum shelves have such high requirements for the ground, mainly due to the characteristics of the shelves themselves and the decision to use aluminum cantilever shelves. Therefore, in order to ensure customer safety, the planning of aluminum cantilever shelves must first consider the ground issue, so as to ensure the safety of personnel and goods.

Read recommendations:

Metal Workbench with Wheels / Rolling Work Table Steel Wire Shelf For Production Line/ NSF Certified

3 tier metal bookself manufacturer

The current status of shelves warehousing development.metal bathroom shelf