Full electric mold shelf.cabinet organizer and storage shelves

　　1. Mold frame specifications: L900*D1480*H3145 Number: 47 sets (3 main 44 sideways)

　　2. A total of 3 rows of mold racks are arranged in 3 rows

　　3. The first row of the mold has a total of 15 grids, the mold frame is 1250mm from the wall, connecting it with the wall surface

　　4. The second row of the model has 16 grids, and the first row is preserved at 1500mm.

　　5. The third row model has a total of 16 grids, placed with the back of the second row, and connected to each other

　　6. Each main roadway is equipped with an electric lifting vehicle for an increase of more than 3.3 meters, a total of 2 units

　　7, mold rack pumping board: length 900*deep 800 load -bearing 3000kg/board

　　8. The first layer of the mold frame is greater than or equal to 1100 net empty

　　9. The second layer is greater than or equal to 800mm net empty

　　10. The 3rd layer is greater than or equal to 600mm net empty

　　11. The mold rack uses pneumatic transmission, the effective stroke of the cylinder is 600mm, and the running speed is adjusted

　　12. Each group of carrier independent control areas, independent control buttons on each layer

　　13. Pillar 10#slot steel, the pillar sliding double -layer reinforcement 5.0mm, pumping plate sliding 5.0 thickness, panel 2.0mm, cylinder xx600, supporting pneumatic switch, gas volume regulating valve, air tube, trachea, trachea, trachea

　　14. After installation, the layer height can be re -adjusted at 50 times in the later stage

　　15. Color: columns, pumps, slides are green, aluminum parts are primary colors

　　16. Spraying process: pickling, phosphorification, anti -static spray coating

Read recommendations:

5-Tier Wire Storage Rack / Steel Organizer Wire Rack Chrome / Custom Steel Wire Racks

5 tier steel wire shelf

How to install the shelves of the shelf factory?