Rules for safe use of shelves in shelf factories

　　1. Overweight prevention: the net weight of each layer of goods storage shall not exceed the larger bearing capacity of the storage rack design scheme.

　　2. Ultra high protection: the height and floor width of storage shelves have been limited, and the specifications of wooden card boards and goods should be slightly less than 100mm of the clean indoor space.

　　3. Anti collision: The electric forklift shall be handled as gently as possible during the whole operation process.

　　4. Prevention of upper heavy goods and lower light goods: the standard of slow unloading for high-rise residential buildings and heavy loading for the ground floor shall be guaranteed.

　　5. The non-standard floor (wooden card board) shall not be used on the storage shelves, and the "Chuanzi" bottom shall be appropriate.

　　6. When there are goods placed on the storage shelf, the actual operating staff should not directly enter the bottom of the storage shelf as much as possible.

Read recommendations:

Metal Workbench For Garage / Adjustable Metal Work Table

2 tier steel wire shelf distributors

How to guarantee the security of automated three -dimensional warehouses?wire storage racks with whe